INTRODUCTION
Welcome! You just got a new Maker UNO and you are about to start your journey to learn coding and electronics. Every journey starts with the 1st step, so let’s treat this post as your 1st step into the world of coding and electronics. Let’s start making something!
From the arduino.cc website, we'll go to Learning, Get Started. This page contains download and installation instructions for Windows, Mac OSX, or Linux. From here, I'll choose the Mac OSX. Next, I will go to the downloads page and start my download. While that is downloading, I will go back to the getting started page for Mac OS 10. How to install Driver for Arduino in Mac OS. Download Driver for MAC and right version for your PC. Open the file folder you just downloaded and double click the FTDIUSBSerialDriverv2218.dmg and press continue. ← How to install Arduino Driver for UNO R3.
In this post we will focus on:
When the Arduino Software (IDE) is properly installed you can go back to the Getting Started Home and choose your board from the list on the right of the page. Last revision 2016/08/09 by SM. The text of the Arduino getting started guide is licensed under a Creative Commons Attribution-ShareAlike 3.0 License. Code samples in the guide are. There should be an additional USB device listed. With the original Arduino boards you might directly get the board name, like „Arduino Leonard“. With the cheaper models it maybe just say „USB Device 2.0“. For the official Arduino boards with the FT232 chips you need the FTDI Driver. Those drivers are officially signed by Apple too. Most of the time, when you install Arduino on Mac OS X, the drivers are installed automatically. However, if there was a problem with the installation and you don't see any options that include 'usbserial' under the 'Tools - Serial Port' menu, then you will need to install the drivers.
- Installing Arduino IDE Software
- Installing USB-Serial Driver
- Upload A Simple Sketch
To get started, you must have:
- Laptop/PC
Connect your Maker UNO to your computer using a USB Micro B cable. The USB will also act as the power supply to your board. Keep it connected.
1. INSTALLING ARDUINO IDE SOFTWARE
Download the latest Arduino IDE at Arduino official website – www.arduino.cc/en/Main/Software. Choose the appropriate installer depending on your computer’s operating system (Windows, Mac OS or Linux). Complete the download, proceed with the installation as usual. (For Windows user, it is recommended to install the first option)
2. INSTALLING USB-SERIAL DRIVER
For Windows users, please follow these steps:
1. Download the CH341 Driver for Windows here
2. Double-click the “CH341SER” file that you have just downloaded.
3. Click “Install”.
4. Click “OK” when the driver is successfully installed.
5. Go to window search, search for “device manager”.
6. At “Device Manager”, expand “Ports (COM & LPT)”. Check which COM port the USB-Serial CH340 driver is being assigned to. For this example, it is COM5. Please take note of the COM number.
7. Connect Maker UNO to your computer. Launch Arduino IDE, go to Tools > Port > COM X (select COM port that you recognized in Step 6).
For Mac users, please follow these steps:
1. Download the CH341 Driver for Mac here.
2. Double-click to unzip the downloaded file. Open the unzipped folder then double-click the pkg file.
3. Click “continue” to begin installation.
4. Once done, click “Restart” to restart your Mac.
5. After you have restarted your Mac, launch Arduino IDE. Choose the driver at Tools > Port > /dev/cu.wchusbserial1420. (please ensure that the Maker UNO is connected to your PC)
3. UPLOAD A SIMPLE SKETCH
1. To select the board model, go to Tools > Board > Arduino/Genuino Uno.
2. Let’s try one of the sample code given. Go to File > Example > 0.1 Basic > Blink.
3. Click the “Upload” button to upload the sample code to your Maker UNO.
4. Check your result!
RESOURCES AND GOING FURTHER
We have prepared a beginner-friendly learning guide to assist you to learn the basic function of Arduino on your own pace. Download learning guide here
M Audio Uno Driver Mac
Visit this page, if you would like to explore more interesting projects of Maker UNO,
For more information, check out the resources below:
PENGENALAN
Selamat datang, tahniah! Anda baru sahaja memiliki board Maker Uno dan anda akan mula pengembaraan untuk mempelajari elektronik dan cara untuk menulis kod. Setiap pengembaraan bermula dengan langkah pertama, jadi sila anggap post ini sebagai langkah pertama anda untuk ke dunia kod dan elektronik. Jom kita mula mencipta!
Apple combo drive or SuperDrive to create audio, MP3, or backup CDs; some non-Apple CD-RW recorders may also work. Songs from the Apple Music catalog cannot be burned to a CD.Software:. Update my itunes for mac. Internet connection to use Apple Music, the iTunes Store, and iTunes Extras.
Dalam post ini, kita akan fokus kepada:
- Cara install software Arduino IDE.
- Cara install driver Maker Uno.
- Memuat naik kod ringkas ke Maker Uno.
Untuk mula, anda perlu ada:
- Laptop/PC
Sambungkan Maker Uno ke PC menggunakan kabel USB mikro B seperti yang tertera pada gambar di bawah. Sambungan USB juga bertindak sebagai bekalan kuasa ke board anda, jadi pastikan ianya sentiasa bersambung.
CARA INSTALL SOFTWARE ARDUINO IDE
Muat turun software Arduino IDE terkini di website rasmi Arduino – www.arduino.cc/en/Main/Software. Pilih installer yang sesuai bergantung pada sistem operasi PC/laptop anda (Windows, Mac OS or Linux). Tunggu sehingga download selesai, kemudian teruskan proses install seperti biasa.
CARA INSTALL DRIVER MAKER UNO
Muat turun driver Maker UNO di Maker UNO product page (klik pada tab Attachment) atau dari link di bawah. Pilih installer yang sesuai bergantung pada sistem operasi PC/laptop anda.
- Untuk OS Linux, biasanya driver sudah sedia ada.
Tunggu sehingga download selesai, kemudian teruskan proses install seperti biasa.
Selepas proses install selesai, port Maker UNO anda akan muncul di Device Manager dibawah kategori Ports (COM & LPT) – contoh USB-SERIAL CH340 (COM3). Pastikan anda ingat nombor port tersebut sebab kita akan gunakannya pada software Arduino IDE nanti.
MEMUAT NAIK KOD RINGKAS KE MAKER UNO
Kini anda sudah sedia untuk upload kod pertama di Maker Uno (mungkin pertama kali dalam hidup anda juga). Buka Arduino IDE, pada tab “Tools”, pilih Board: “Arduino/Genuino Uno” dan nombor Port Maker UNO anda (contoh COM3).
Jom kita cuba sampel kod “Blink”. Klik pada “File” > “Example” > “0.1 Basic” > “Blink”.
Kemudian klik butang ikon “Upload” untuk memuat naik kod ke Maker Uno.
SUMBER RUJUKAN DAN LANGKAH SETERUSNYA
Sekarang anda boleh lihat LED13 pada board Maker Uno berkelip. Hurray! Anda telah berjaya menyiapkan projek pertama. Seterusnya, jom cuba tukar kod tersebut, tukar “LED_BUILTIN” ke apa-apa nombor diantara 2 hingga 13. Sebagai contoh, ubah kod pada baris 28 “pinMode(LED_BUILTIN, OUTPUT)” ke “pinMode(2, OUTPUT)”. Jangan lupa untuk ubah juga”LED_BUILTIN” pada baris 33 dan 35 ke nombor yang sama. Klik upload dan lihat apa yang terjadi. Anda akan perasan LED yang lain akan berkelip.
Kepada sesiapa yang perlukan tunjuk ajar dengan lebih terperinci, anda boleh rujuk video di atas post ini. Masih tidak cukup dan perlukan bimbingan? Jangan malu jangan segan untuk bertanya di teknikal forum kami.
Untuk maklumat lanjut, sila rujuk sumber dibawah:
So I bought some Arduino Nano (https://www.arduino.cc/en/Main/ArduinoBoardNano) over Amazon lately and was amazed that I got 5 boards for only ~15 EUR by some chinese retailer. When I finally found some time and wanted to start programming with the Nano modules I couldn’t manage to connect them to the Arduino IDE.
If connected via USB you normally have to make the USB connection first, start the Arduino IDE and finally have to select the model and mainly the port over the Tools menu. I did so on my OSX 10.11 ( El Capitan ), but the Nano module didn’t show up on the ports list. Only /dev/cu.Bluetooth-Incoming-Port was listed.
After some days of random Google researches and several driver installations without fixing the problem, I finally found out that there are two main USB to UART converter chips used which need different drivers.
Official boards use FT232 some chinese boards use a CH340 Chip
First have a look at the USB modules on your board and read if it says something like „CH34*“ or „FT232“. You could with the chip on the backside of the Arduino board like this:
First of all be sure that your board is still working and is detected at the USB Port. So go by „Apple Logo top left“ > „About This Mac“ > „System Report“ > „Hardware / USB„. Try this once without the Arduino board connected and once with the board connected. There should be an additional USB device listed. With the original Arduino boards you might directly get the board name, like „Arduino Leonard“. With the cheaper models it maybe just say „USB Device 2.0“.
For the official Arduino boards with the FT232 chips you need the FTDI Driver. Those drivers are officially signed by Apple too. No further problems to be expected. Do the following steps:
- Download the drivers ( Version 2.3 and later ) from here: http://www.ftdichip.com/Drivers/VCP.htm
- Install the downloaded .pkg file
- restart the computer
- You should find a new port listed within the Arduino IDE, like /dev/tty.usbserial-xxxxxxxx
For other boards using the CH34x chip you need those drivers. The problem here is, that they are currently not signed by Apple ( and probably will never ). So we have to switch of the security mode. This is of course officially not recommended. WARNING: This will not work with OSX 10.12 (macOS / OSX Sierra). For macOS 10.12 or later you could use the following solution. Please do not do this with those versions as this will stop the boot process and you have to unset this via recovery mode.
For OSX 10.9 – 10.11. you could do the following steps:
- Download the drivers from here: http://www.wch.cn/downfile/178
- Install the downloaded .pkg file
- restart the computer
- run the following command within the terminal
sudo nvram boot-args='kext-dev-mode=1' - after confirming this with your admin password, restart the computer
- You should find a new port listed within the Arduino IDE, like /dev/cu.wchusbserial1d10
Uno Mac Download
If you want to remove those drivers later remove all file like „FTDIUSBSerialDriver.kext“ or „usbserial.kext“ from the /Library/Extensions directory.
Arduino Uno software download, free
cheers.
Sebastian